Dosatron Injectors - Installed in a water supply-line, the proportional injector works whenever the water flows. The flow of water sets in motion the motor piston which is linked to the injector piston thus ensuring the drawing up of the solution.
The solution is mixed with the water and discharged into the outlet pipeline. As the motor piston is linked directly to the injector piston, the proportion of solution to water remains constant whatever the variations in flow or pressure in the system.

- For you: the high performance dispenser gives maximum output
- For your crops: exactly the right dose, when and where needed
- For your personnel: less handling of concentrates
- For the environment: reduces the risk of pollution through over-concentration of fertilisers
- The dispenser is completely hydraulic and so requires no electrical connections
- Precise dosing avoids waste
- Set it, leave it - it needs no further attention
- The dispenser is easily installed in the water line
- It works continuously
- The dosage is set externally
- Easy to use - just turn the water on!
- Disinfect, treat and ensure the maintenance of networks: dosing of products into irrigation water
- And dose almost any liquids or water-soluble concentrates

Water Authority By-Laws Require Dilutors To Be Connected To A Pumped Or Gravity Supply

Ref	Model	Flow Range	Injection Rates	Pressure	Connection
DOS01	D3GL2	10 l/h to 2500 l/h	0.2% to 2.0%	0.3 to 6.0 bar	¾" M BSP
DOS02	DI 150	10 l/h to 2500 l/h	1.0% to 5.0%	0.3 to 6.0 bar	¾" M BSP
DOS04	DSA 45-1.5	100 l/h to 4500 l/h	0.2% to 1.5%	0.5 to 6.0 bar	1¼" M BSP
DOS07	D8R	500 l/h to 8000 l/h	0.2% to 2.0%	0.15 to 8.0 bar	50mm PVC
DOS08	D20R	1000 l/h to 20,000 l/h	0.2% to 2.0%	0.12 to 10.0 bar	63mm PVC
DOS09	D30S Turbo	8000 l/h to 30,000 l/h	0.25% to 1.25%	1.0 to 8.0 bar	2" M BSP